request to quote
Leave Your Message

Super safe 500W 690Wh na-ion sodium portable power station from China

This sodium ion battery portable power station adopts a single 230Ah sodium-ion cell design, featuring exceptional low-temperature performance with 85%–92% capacity retention at -20°C and stable discharge at -30°C, removing the need for internal heating films to cut costs. It boasts superior safety over lithium iron phosphate batteries with strong resistance to puncture, extrusion and impact, no lithium dendrite risks, and excellent tolerance to overcharge and over discharge. Abundant sodium resources insulate it from lithium price volatility for favorable long-term kWh costs. The single-cell structure eliminates series voltage imbalance, simplifying BMS circuitry, lowering failure rates and easing production and after-sales service. With centralized, uniform heat dissipation, the product delivers markedly lower overheating risks compared to multi-cell battery packs 

  • Rated Power: 500W
  • Rated energy: 590Wh
  • Housing: ABS
  • Working Temperature: -30°C~+70°C
  • Cycle Life: >2,000 Times
advantages of sodium power power station(1)

Product Advantages of Single 230Ah Sodium-ion Cell Portable Power Station

1. Extreme Low-temperature Performance

● It retains 85%~92% of its rated capacity at -20°C, and can still discharge normally at -30°C.

● Ideal for alpine camping and emergency power supply in northern cold winters. The internal heating film inside the power station can be eliminated, simplifying structural design and cutting manufacturing costs.

2. Enhanced Safety & Higher Resistance to Outdoor Impacts

● Its thermal runaway temperature is much higher than that of lithium iron phosphate cells. It will hardly catch fire or explode under nail penetration, extrusion and impact conditions, which well addresses higher risks of transportation, drop and compression for outdoor power stations compared with indoor energy storage products.

● Free from the risk of separator puncture caused by lithium dendrites, it has a much lower swelling rate under long-term bumpy operation, resulting in fewer after-sales failures.

● It features strong tolerance against overcharging and overdischarging, offering greater fault tolerance for BMS protection strategies.

3. Downward Long-term Raw Material Cost Trend

Sodium resources are abundant worldwide, with no reliance on lithium, cobalt or nickel. Its cost is barely affected by lithium price fluctuations. Upon large-scale mass production, its cost per kWh will be lower than lithium iron phosphate, bringing stronger competitiveness in overall product pricing.

4. Ultra-simplified Circuit Design & Greatly Reduced Failure Rate

Built with a single 230Ah sodium-ion cell without cell series connection, it eliminates inter-string voltage difference issues. This leads to lower BMS cost, simpler program logic, smaller PCB size, as well as much easier development, commissioning and after-sales maintenance.

5. Uniform Heat Dissipation & Superior Thermal Safety

With only one individual cell as the heat source, heat distribution is uniform without mutual thermal interference between adjacent cells. Combined with inherent safety merits of sodium-ion batteries, the whole unit carries far lower risk of overheating and thermal runaway than multi-cell lithium iron phosphate battery packs.

Technical Data sheet

   SPECIFICATION Na-ESS-1KW/1380Wh
Battery type Sodium-ion cell
Rated Energy 1380Wh
Nominal Battery Voltage 6.0Vdc
Typical Capacity 230Ah
Max.Charge Current 220A
Max.Discharge Current 220A
Operation Voltage Range 4.0Vdc~7.2Vdc
Working Temperature -30°C~+70°C
 LED Indicator 4 pcs SOC indicators, 1 pcs working status indicators
DC Output Power DC12V 60W Max
 DC Output Socket 1 pcs 5V2A USB charger, 2 pcs 12V2A DC Power JACK 5.5*2.1mm
Noise(dB) <40dB (1 meter)
 Humidity 0~95% (no condensation)
 Dimension 270*250*300mm
Rated AC Output Power 1000W
Output Voltage Waveform Pure Sine Wave
OutputVoltage 185~230VAC 50Hz
Low DC Warning Voltage 4.0Vdc
Low DC Cut-off Voltage 3.6Vdc
Low DC Warning Return Voltage 4.2Vdc
 Charging Power(Utility and solar together) 1100W Max
Nominal Input Voltage 230Vac
NominaI Input Frequency 45~65Hz
AC Charging Power 500W Max
Nominal PV Voltage 38Vvdc
PV Array MPPT Voltage Range 10Vdc~50Vdc
Solar Charging Power 600W Max
                     Features Pure sine wave output,Programmable supply priority for PV, battery or Grid,Built-in MPPT trackers and enhanced AC & solar charger,Support mobile phone charging and DC lamp interface,Compatible to Utility Mains or generator input.

Application

 Power supply for self-driving camping, RV travel, outdoor cooking and fishing

● Emergency backup power for household power outages

● Power supply for outdoor shooting, livestreaming and field survey work

● Off-grid power supply for orchard, fish pond and field monitoring equipment

● Outdoor power consumption in cold northern regions during winter

● Emergency backup power for small medical devices

Sodium battery power station application

Leave Your Message

01/02